Crown-audio DCi Series – Network Input Models Bedienungsanleitung PDF herunterladen (Seite 23)

DriveCore Install Network Series Power Ampliﬁers

page 23

Operation Manual

Dual Mode Hi-Z (70V/100V) Mode

Typical input and output wiring, along with software

settings are shown in Figure 14. A 35Hz high pass ﬁlter

is selected automatically when the ampliﬁer channel

is in Hi-Z or Bridged Hi-Z mode. Remember, DCi

ampliﬁers allow each channel Hi-Z or Low-Z mode of

operation to be selected independently, while 70V/100V

selection is global.

Figure 14 System Wiring for 70V/100V Operation

Figure 14

Always route the input and output wires in separate bundles.

Set-up and System Conguration

Note: 70/100V is global, while Low-Z/Hi-Z is per output channel

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 65 66

Keine Kommentare

Crown-audio DCi Series – Network Input Models Bedienungsanleitung Seite 23